Stopping a climbing fall

In case of a fall, hold the brake-side rope firmly, while pulling it downward. Whatever the device used, the act of gripping the brake-side rope with your hand increases the rope friction in the device, allowing the fall to be stopped.

WARNING: do not grip the climber-side rope! Never let go of the the brake-side rope.

Train yourself to stop falls in different situations, or get professional training. For a dynamic belay, do a small jump or take a step forward to reduce the impact force on the climber.

A good belayer is able to do much more than stop a fall: s/he knows when to do a dynamic belay and when to stop a fall more abruptly if necessary to prevent the climber from hitting an obstacle (ground, ledge, other climber...). At the moment of a fall, there is no time to decide whether to use a dynamic belay or not. So one must always be prepared for the possibility of a fall and be ready to stop it.



Here are the essential points to consider (non-exhaustive list):

• potential fall height and fall severity (if the climber is far from the last point of protection or offset from the axis of the protection...).
• risk of hitting an obstacle during the fall and available space for giving a dynamic belay.
• issue of a long fall on an overhang, if the climber needs to regain the rock to continue the route,
• space for the belayer if giving a dynamic belay: he/she will be pulled against the wall and thus must have a clean area, not be barefoot, have no knots in the rope...